shore landscape at dusk

Coffee to Water Ratio Calculator

Find grams of coffee and water for any brew ratio, cup count or brew method, with ounces, tablespoons and each step shown.

Presets
Result: Water = 320 g / 320 ml
Coffee vs. water 1:16 brew ratio
Coffee (g) 20 g Brew water (g = ml) 320 g In the cup, est. (2 g/g held by grounds) ≈ 280 ml
Coffee vs. water
ItemValue
Coffee (g)20 g
Brew water (g = ml)320 g
In the cup, est. (2 g/g held by grounds)≈ 280 ml
  1. 1 Brew ratio
    1 : 16
    16 g water per 1 g coffee
  2. 2 Multiply coffee by the ratio
    20 × 16
    320 g water
  3. 3 Grams to ml (1 g water = 1 ml)
    320 g
    320 ml
  4. 4 In fl oz
    320 ÷ 29.5735
    ≈ 10.82 fl oz

This coffee to water ratio calculator turns a brew ratio into coffee and water weights. Enter a coffee dose, a water amount or a number of cups, pick a ratio such as 1:16, and the result shows the missing amount in grams, milliliters, fluid ounces and tablespoons, with each step and a coffee-versus-water bar chart. A brew ratio is a proportion, so the same cross-multiplication used by our proportion calculator drives every answer.

How to Use the Coffee Ratio Calculator

To use the coffee ratio calculator, choose a mode, enter one amount and one ratio, and read the missing amount in the output display. There is no calculate button: the input fields solve live, and the reset button restores the default 20 g dose.

Step 1: Select Your Brew Method

Select a brew method chip, such as Pour-over 1:15 or Espresso 1:2, to load a starting ratio. Because any 1:N number is accepted, the page also works as a general brew ratio calculator.

Step 2: Choose Your Intensity Level

Choose Mild (1:17), Average (1:16), Strong (1:15) or Robust (1:13). These four presets are this site's own defaults for filter coffee, not an industry rule. A lower second number means more coffee per gram of water and a higher brew strength. Used this way, the intensity row is a simple coffee strength calculator.

Step 3: Select Your Calculation Mode

Select From coffee when you know the dose, From water when you know the water, or By cups for a number of cups. From water mode is a coffee dose calculator: it divides the water by the ratio.

Step 4: Enter Your Amount

The coffee amount input takes grams, and the water amount input takes milliliters, fluid ounces, US cups or liters. In By cups mode, pick a 5 fl oz or 6 fl oz coffee-maker cup or an 8 fl oz US cup. The ratio box accepts 16, 1:16 or 3:50.

Step 5: View Your Results

The result updates as you type, and Solution Steps shows the working in grams, ounces and tablespoons. Like any coffee brewing ratio calculator, it reports brew water, so the bar chart also estimates the drink left after the grounds hold back about 2 g of water per gram. Share copies a link that reopens this coffee-to-water ratio tool with the same numbers.

Step 6: Reference Temperature & Time Guides

Check the temperature and contact time for your method in the brewing guides below; heat and time decide how much coffee dissolves.

Coffee to Water Ratio Formula

The coffee to water ratio formula multiplies the coffee dose by the second number of the ratio. A ratio of 1:N means N g of water for every 1 gram of coffee.

Formula

water (g) = coffee (g) × N coffee (g) = water (g) ÷ N

N is the second number of the 1:N brew ratio. Water is weighed: 1 ml of water counts as 1 g.

A 20 g dose at 1:16 needs 20 × 16 = 320 grams of water, which is 320 ml or about 10.8 fl oz. Going the other way, 500 ml of water at 1:16 needs 500 ÷ 16 = 31.25 g of coffee, about 1.1 oz. A ratio written with two numbers, such as 3:50, works the same way: 50 ÷ 3 ≈ 16.67, so it equals 1:16.67.

To calculate coffee ratio from two weights, divide the water by the coffee: 300 g of water and 20 g of coffee give 300 ÷ 20 = 15, a 1:15 ratio. Some recipes quote a water to coffee ratio such as 16:1, which is the same proportion written in reverse.

Worked example: 4 coffee-maker cups

Problem: How much coffee do 4 cups need in a drip machine that marks a cup as 6 fl oz, at 1:16?

Solution: 4 × 6 fl oz = 24 fl oz = 709.8 ml of water. 709.8 ÷ 16 ≈ 44.4 g of coffee, about 1.6 oz or 9 level tablespoons.

Because a coffee to water proportion stays fixed, doubling the dose doubles the water. Spent coffee grounds keep roughly 2 g of water for every gram of coffee, so 320 g of brew water from a 20 g dose leaves about 280 ml in the cup.

Coffee to Water Ratios Explained

Coffee-to-water ratios for different brewers range from about 1:2 for espresso to about 1:18 for a light filter cup. This coffee ratio guide lists coffee ratios as starting points to adjust by taste. We recommend three coffee-to-water ratios as everyday filter defaults: 1:15, 1:16 and 1:17.

Pour-over Coffee Ratio (1:15)

The pour-over coffee to water ratio starts at 1:15, with a common range of 1:15 to 1:17. Load the Pour-over 1:15 chip to use the tool as a pour-over ratio calculator.

French Press Coffee Ratio (1:15)

The French press coffee to water ratio starts at 1:15. A typical French press ratio range runs from 1:12 to 1:15, with a coarse grind and about 4 minutes of steeping.

Chemex Coffee Ratio (1:15)

The Chemex coffee to water ratio starts at 1:15 to 1:16. The thick paper filter slows the flow, so a medium-coarse grind keeps the brew near 4 minutes.

Autodrip Coffee Ratio (1:16)

The Autodrip coffee to water ratio starts at 1:16. The Drip 1:16 chip turns the page into a drip coffee ratio calculator; weigh the water you pour into the reservoir rather than trusting the carafe markings.

Moka Pot Coffee Ratio (1:10)

The Moka Pot coffee to water ratio runs near 1:7 to 1:10, because the basket size sets the dose. Fill a stovetop Mokapot basket level without tamping, and fill the lower chamber to just below the valve.

Siphon Coffee Ratio (1:15)

The Siphon coffee to water ratio starts at 1:15, with a medium grind and about 1 minute of contact in the upper chamber.

AeroPress Ratios: Standard (1:15), Inverted (1:12), Concentrate (1:6)

An AeroPress covers the widest range: about 1:15 for a full cup, 1:12 for an inverted brew, and 1:6 for a concentrate topped up with hot water.

Espresso Ratio (1:2)

The espresso ratio starts at 1:2 by weight, for example 18 g of coffee in and 36 g of liquid out, in about 25 to 30 seconds. Brew length is the espresso term for the liquid weight in the cup. The Espresso 1:2 chip makes this an espresso ratio calculator.

Ristretto Ratio (1:1)

A ristretto stops the shot early at about 1:1 to 1:1.5, giving a shorter and thicker drink.

Lungo Ratio (1:4)

A lungo runs longer, at about 1:3 to 1:4, for a larger and lighter-bodied shot.

V60 Ratio (3:50)

A 3:50 ratio equals 1:16.67, for example 15 g of coffee to 250 g of water, a popular single-cup V60 recipe.

Steep-and-Release Ratio (1:16)

Steep-and-release brewers, which hold the coffee in water and then drain it through a valve, start well at 1:16 with a 3 to 4 minute steep.

Cold Brew Ratio (1:11) and Concentrate (1:5)

Ready-to-drink cold brew sits near 1:8 to 1:11, and the Cold brew 1:8 chip sets up a cold brew ratio calculator at that strength. A concentrate ratio of 1:4 to 1:5 makes a base that you dilute with water or milk. Steep coarse grounds for 12 to 24 hours.

Turkish Coffee Ratio (1:10)

Turkish coffee uses about 1:10, roughly 7 g of powder-fine coffee to 70 ml of water per small cup, heated slowly in a cezve.

Cupping Ratio (11:200)

An 11:200 cupping ratio equals 1:18.18, the same proportion as 8.25 g per 150 ml in the SCA cupping protocol.

Coffee Brewing 101

This coffee brewing guide covers ratio, heat and technique.

What are coffee brewing ratios?

Coffee brewing ratios are the weight of ground coffee compared with the weight of water, written as 1:N. Weight is the most reliable coffee measurement, because a scoop of coffee grounds changes with grind size. The Golden Cup Standard of the Specialty Coffee Association (SCA) sets about 55 g of coffee per liter of water, plus or minus 10%, which is roughly 1:18. The same standard targets 1.15 to 1.35% total dissolved solids (TDS), a measure of coffee concentration. The share of coffee that dissolves, sometimes called the coffee extraction ratio, should land between 18 and 22%.

What is the ideal coffee brewing temperature?

The ideal brewing temperature is 93 °C plus or minus 3 °C, about 90 to 96 °C (195 to 205 degrees Fahrenheit), where water meets the grounds. Boiling water at 100 °C is slightly too hot, so let the kettle rest for about 30 seconds or check it with a thermometer. Water temperature controls how fast flavor compounds dissolve.

Ideal Brewing Temperature for Light Roast Coffee

Light roast coffee usually brews best near the top of the range, about 94 to 96 °C (201 to 205 °F), because the dense beans release flavor more slowly.

Ideal Brewing Temperature for Medium Roast Coffee

Medium roast coffee works well in the middle of the range, about 91 to 94 °C (196 to 201 °F).

Ideal Brewing Temperature for Dark Roast Coffee

Dark roast coffee often tastes less bitter a little cooler, about 88 to 91 °C (190 to 196 °F), because darker beans extract faster.

How to brew the perfect cup of coffee?

To brew a balanced cup, weigh the coffee, weigh the water, grind just before brewing, and change one variable at a time. The perfect coffee ratio is the one you can repeat every morning with a scale. Of all the settings, the ratio moves coffee flavor balance most directly. Run our coffee calculator for the exact measures of each new batch size.

The top 8 tips for brewing a better cup of coffee

  1. Weigh coffee and water on a 0.1 g scale.
  2. Grind right before brewing.
  3. Match grind size to contact time: fine for espresso, medium-fine for pour-over, coarse for French press.
  4. Use filtered water with moderate minerals.
  5. Rinse paper filters with hot water first.
  6. Bloom filter coffee for 30 to 45 seconds.
  7. Log dose, water and time for each brew.
  8. Store beans airtight and use them within a few weeks of roasting.

Coffee Brewing Tips

The Perfect Pour Over Guide

A reliable pour over ratio is 15 g of coffee to 250 g of water at about 93 °C. Pour 30 g of water to bloom, wait 40 seconds, then add the rest in two or three slow spirals so the brew finishes in 3 to 3.5 minutes. A fast drawdown points to a coarse grind, and a slow one points to a fine grind.

Mastering the Art of Espresso: The Role of Timing

Espresso timing shows how the grind is working. A 1:2 shot that runs in under 20 seconds tastes sour and needs a finer grind, while a shot past 35 seconds tastes bitter and needs a coarser one. Most barista ratios are written by weight, so dial in with the grind first and the dose second.

Alternative Coffee Chart

This coffee ratio chart lists grams of coffee and milliliters of water for 1 to 12 cups at 1:16. Coffee-maker cups use 6 fl oz (177 ml); US cups use 8 fl oz (236.6 ml). For 6 cups at 1:16, a coffee maker needs about 66.5 g of coffee and 1,065 ml of water. For 8 cups, it needs about 88.7 g and 1,420 ml.

Coffee and water at a 1:16 ratio
CupsCoffee, 6 fl oz cupsWater, 6 fl oz cupsCoffee, 8 fl oz cupsWater, 8 fl oz cups
1 11.1 g 177 ml 14.8 g 237 ml
2 22.2 g 355 ml 29.6 g 473 ml
3 33.3 g 532 ml 44.4 g 710 ml
4 44.4 g 710 ml 59.1 g 946 ml
5 55.5 g 887 ml 73.9 g 1,183 ml
6 66.5 g 1,065 ml 88.7 g 1,420 ml
7 77.6 g 1,242 ml 103.5 g 1,656 ml
8 88.7 g 1,420 ml 118.3 g 1,893 ml
9 99.8 g 1,597 ml 133.1 g 2,129 ml
10 110.9 g 1,774 ml 147.9 g 2,366 ml
11 122 g 1,952 ml 162.7 g 2,602 ml
12 133.1 g 2,129 ml 177.4 g 2,839 ml

For a robust cup of coffee, move to 1:15 or 1:13 in the calculator; the chart scales in the same proportion.

Common Coffee Ratio Mistakes

The most common coffee ratio mistake is measuring coffee by scoop or tablespoon. A level tablespoon of ground coffee weighs about 5 to 7 g depending on grind and roast, so two scoops can differ by 20% or more. This calculator uses 5 g per tablespoon for its estimate.

  • Mixing up cup sizes: a coffee-maker cup is usually 5 or 6 fl oz, while a US cup is 8 fl oz, so an 8-cup coffee maker holds far less water than 8 measuring cups. Use our coffee calculator in By cups mode to see the difference.
  • Counting the finished drink instead of the brew water.
  • Expecting one best coffee ratio for every brewer; espresso, cold brew and filter coffee need very different numbers.
  • Treating darker beans as stronger. Roast level changes flavor, while the brew ratio changes strength.

Brew ratios also behave like a mix ratio calculator problem when you dilute cold brew concentrate, and any 1:N ratio can be scaled or simplified with the ratio calculator.

Coffee Ratio FAQs

What is the best coffee to water ratio?

The best coffee to water ratio for most filter coffee is 1:15 to 1:17, with 1:16 as a reliable start. The SCA Golden Cup Standard sits near 1:18 (55 g per liter). Choose the number depending on whether you want a lighter or a heavier cup. Then move one step at a time to find your ideal coffee ratio.

How many grams of coffee per cup?

A 6 fl oz coffee-maker cup needs about 11 g of coffee at 1:16, and an 8 fl oz US cup needs about 15 g. For the Golden Cup ratio of about 1:18, use 10 grams per 6 fl oz cup.

How much is a cup of coffee?

A cup of coffee is usually 5 or 6 fl oz on a coffee maker and 8 fl oz (236.6 ml) as a US measuring cup. Check the manual for your machine, then pick the matching cup size in By cups mode.

Should I measure coffee in tablespoons or grams?

Measure coffee in grams. A tablespoon of ground coffee varies from about 5 to 7 g, while a scale gives the same dose every time. Each result still lists a tablespoon estimate for brewing without a scale.

How do I calculate coffee beans to water ratio?

Divide the water weight by the ratio number to get the coffee weight. For 600 grams of water at 1:15, use 600 ÷ 15 = 40 g of whole beans, then grind them. Whole beans and ground coffee weigh the same.

Does a dark roast make stronger coffee?

No, a dark roast does not make stronger coffee. Strong and weak describe the coffee to water ratio, while dark and light describe the roast. A dark roast at 1:17 is weaker than a light roast at 1:14.

References

Related Calculators