fog landscape at dusk

Ratio Table Calculator

Fill in the missing values of any ratio table, or build a new one from A : B, with the unit rate and a double number line.

Result: 2:3, 4:6, 6:9, 10:15, 20:30

Completed table

  1. A: 2 | 4 | 6 | 10 | 20
  2. B: 3 | 6 | 9 | 15 | 30
Double number line B ÷ A = 1.5 in every column
A B 2 3 4 6 6 9 10 15 20 30
Ratio table
23
46
69
1015
2030
  1. 1 Known pair
    column 1: 2 : 3
    simplest 2 : 3
  2. 2 Unit rate
    B ÷ A = 3 ÷ 2
    1.5 B per 1 A
  3. 3 Fill the blanks
    B = A × rate, A = B ÷ rate
    4 values filled
  4. 4 Check
    every column has the same B ÷ A
    ✓

This ratio table calculator fills in the missing values of a two-row ratio table and builds new tables from any ratio A : B. Type the top and bottom rows with a question mark for each blank, and the result shows the completed table, the unit rate, every step and a double number line. Each column of a ratio table is the same proportion, so any single blank can also be solved with our proportion calculator.

How the Ratio Table Calculator Works

A ratio table lists equal ratios in columns, with one quantity in the top row and the other in the bottom row. Any two columns form proportions. The calculator finds one column with both values, works out the unit rate (bottom ÷ top), and multiplies or divides by that rate to fill every blank. Each filled cell is a missing ratio value found from that one rate.

Type the input values in the two rows; the output values appear in the completed table. Each column holds one pair of ratio values, and ratio pairs in a proportional table share one rate. These ratio calculations stay exact. Before filling anything, it checks that every complete column has the same rate. If one column breaks the pattern, the result names it, so a typo cannot slip into the answer.

Ratio Table Formula

The ratio table formula uses one known pair A : B to find any missing value.

Formula

D = C * (B/A) C = D * (A/B)

A : B is the known column and C : D a column with one blank. B/A is the unit rate: how much of the bottom quantity goes with 1 of the top.

Writing the columns as a ratio equation, A : B = C : D, gives the same result by cross-multiplication. Using the ratio equation is the method most textbooks call solving a proportion.

How to Use the Ratio Table Calculator

To use the calculator, choose a mode, type values into the input fields, and read the completed table in the output display. There is no calculate button, and the reset button restores the example.

  1. Complete a table: type the top row, such as 2, 4, ?, 10, ?, and the bottom row, such as 3, ?, 9, ?, 30.
  2. Use ? or leave a cell empty for each blank; every column needs at least one value.
  3. Generate: enter A, B, the number of columns and a multiplier to build a new table.
  4. Open Solution Steps to see the known pair, the unit rate and the check.

The calculator shows the steps and solves every blank in one pass. Values can be whole numbers, decimals or fractions such as 1/2.

This ratio table tool has two modes. Generate mode is a ratio table generator. Complete mode is a ratio table solver. Teachers also call it a ratio table maker. As a proportion table calculator, it checks every column before filling blanks. It runs as a free ratio calculator. It also works as an online ratio calculator on phones. Students can use it as an interactive ratio table tool. For a single blank, any proportion solver gives the same answer. A ratio solver and this page share the same unit-rate math.

How to Complete a Ratio Table

There are four ways to complete a ratio table by hand, and all four give the same numbers.

  • Multiply a column: 2 : 3 times 5 gives 10 : 15.
  • Divide a column: 20 : 30 divided by 10 gives 2 : 3.
  • Add two columns: 2 : 3 plus 4 : 6 gives 6 : 9.
  • Use the unit rate: 3 ÷ 2 = 1.5, so a top value of 14 needs a bottom value of 14 × 1.5 = 21.

The ratio table method relies on multiplication. That is called multiplicative comparison: each column is a multiple of the first, never a fixed amount more. It is the core of proportional reasoning in grade 6 math. For 4 : 5 = 12 : D, the rate is 1.25, so the missing ratio value is 15.

Ratio Table Examples

Example 1: unit price

Problem: 3 notebooks cost $4.50. What do 1, 5 and 8 notebooks cost?

Solution: Unit rate = 4.50 ÷ 3 = $1.50 per notebook. 1 → $1.50, 5 → $7.50, 8 → $12.

Example 2: scaling a salad

Problem: A salad uses 2 cucumbers for every 3 tomatoes. How many cucumbers go with 12 tomatoes?

Solution: 12 ÷ 3 = 4, so multiply both by 4: 8 cucumbers to 12 tomatoes.

Example 3: map scale

Problem: On a map, 2 cm stands for 5 km. How far is 7 cm? (1 in ≈ 2.54 cm)

Solution: Unit rate = 5 ÷ 2 = 2.5 km per cm, so 7 cm is 17.5 km (about 10.9 miles).

These ratio table examples cover money, food and maps; the same table works for paint colors, speeds and recipes such as mac and cheese with macaroni, milk and cheese.

Double Number Lines and Tape Diagrams

A double number line draws the two rows of a ratio table on two parallel lines, with matching values stacked above each other. The calculator's visual is a double number line: original values are marked in periwinkle, and filled blanks in apricot.

A tape diagram shows the same ratio as strips of equal parts. For 2 : 3, draw 2 boxes for A and 3 boxes for B; if each box is worth 4, the column is 8 : 12. Both models are part of grade 6 ratio standards.

Ratio Tables With 3 Terms

A ratio table can have three rows for 3-term ratios such as a 1:2:3 ratio of cement, sand and gravel in a concrete mix ratio. Each column multiplies all three terms by the same number: 1 : 2 : 3, 2 : 4 : 6, 5 : 10 : 15. For A:B:C = D:E:F problems with one known column, the Ratio Calculator 3 Numbers solves the missing terms.

Simplifying Ratios in a Ratio Table

Simplifying ratios makes a table easier to read. Divide the first column by its greatest common divisor to get lowest terms: for 12 : 18 the GCD is 6, so the first column becomes 2 : 3. Write each column as a fraction with A as the numerator and B as the denominator, and the value stays the same across the table.

A mixed number such as 1 1/2 works too; type 1 1/2 or 3/2. To simplify ratios with decimals, multiply by 10 or 100 first. A Ratio Simplifier does this step on its own, and a ratio calculator simplifies ratios before scaling them. Scaling ratios with a Scale Ratio keeps every column equal. Ratio conversion to percentages is a separate step. The ratio calculator handles it.

Ratio Table Practice

Try these ratio table practice problems; the answer follows each one.

  1. Complete the table: top 4, 8, ? and bottom 5, ?, 20. Answer: 16 and 10.
  2. Complete the table: top 3, ?, 12 and bottom ?, 14, 28. Answer: 6 and 7.
  3. Is the table 2, 5, 8 over 6, 15, 25 proportional? Answer: no, because 25 ÷ 8 is not 3.
  4. Build a table for 3 : 7 with four columns. Answer: 3 : 7, 6 : 14, 9 : 21, 12 : 28.

Print the list as a ratio table worksheet, or type each item into the calculator to see the steps. Most ratio table problems in class look like these. They match the 6th grade ratio tables unit in many curricula. How to use a ratio table in a test: find the rate first, then fill each blank. Ratio table math needs nothing beyond multiplication and division. Math ratio tables also appear in science for speed and density. Ratio and proportion questions in algebra use the same layout.

Common Ratio Table Mistakes

  • Adding the same amount to both rows: 2 : 3 becomes 4 : 5, which is not an equal ratio.
  • Mixing up the rows, so the rate flips from 1.5 to 0.67.
  • Mixing units, such as minutes in one column and hours in another.
  • Rounding the unit rate too early; keep fractions until the last step.

A part to part ratio table compares two pieces, such as boys to girls. A part to whole ratio table compares a piece with the total, such as boys to students. These are also written as part-to-part ratios and part-to-whole ratios, and the rows must say which kind you use.

Ratio Table FAQ

What is a ratio table?

A ratio table is a table of equal ratios, with one quantity per row and one ratio per column. Every column has the same unit rate.

How do you find a missing value in a ratio table?

Divide the bottom value by the top value of a complete column to get the unit rate, then multiply. For 2 : 3, the rate is 1.5, so 10 on top pairs with 15 below.

Can a ratio table use fractions or decimals?

Yes, ratio tables work with fractions and decimals. 1/2 : 3 and 1.5 : 9 belong in the same table because both have a rate of 6.

What is the difference between a ratio table and a double number line?

A ratio table lists the pairs in rows and columns, while a double number line places them on two parallel scales. Both show the same equal ratios.

How do I know if a table is proportional?

A table is proportional when every column has the same quotient of bottom ÷ top. If any quotient differs, the relationship is not proportional.

Why does the calculator say a column does not match?

The message means one complete column has a different rate from the others. Check that value for a typo, or clear it to let the calculator fill it.

References

Related Calculators